|
|
|
| MacOSX 10.5 Leopard(PC安装版 只适用Intel SSE3 CPU) |
运行环境:PC/通用Universal(Intel&PowerPC)
 |
苹果下载赞助商：
|
| 软件大小:4.38GB |
| 下载次数:31681/32653 |
| 添加时间:2007-10-30 |
| 软件等级: |
| 授权方式:破解软件 |
| 软件作者:苹果在线 |
| 主页:http://www.macgame.com.cn |
| 演示地址:http://www.macosx.com.cn |
软件详细资料:
Mac OSX 10.5 LeopardPC安装版,只适用Intel SSE3 CPU.不支持AMD.
以下是英文安装说明.
看不懂的我简单翻译一下:
1、下载后需要准备一个U盘，格式化成FAT32格式，并且把卷标改成Patcher，大小写不能错，如果不会改卷标那就不要装了。把下载的files.zip里的文件解压到U盘上。你的U盘里应该有一个file的文件夹。
2、开始安装MacoSX 10.5，
3、开始破解MacoSX 10.5，安装后，需要重启，一定还用光盘启动，看到启动画面按F8，输入-s，然后回车，选语言，进下一步，然后在菜单中选择工具-->Terminal终端，
输入
cd ..
cd ..
cd Volumes
cd Patcher
cd files
./9a581PostPatch.sh
现在开始破解，中间会删除ACPUPowerManagement.kext ，选择Yes
4、破解完成后，重启电脑即可。
Make sure you backup all important data before you proceed. Here are the things that you will need before Install Leopard on your PC…
The Patched DVD Image
The zip file containing the patch
One pen drive or USB Flash Drive formatted as FAT32
Well once you have all these you can go ahead and Install Leopard..
Step 1. Getting things ready
Burn the DVD Image onto a Single Layer DVD-R using a software like Nero.
Format the USB Flash Drive and the drive label should be "Patcher" without the quotes. Please note it has to be "Patcher" only and nothing else for the patch to work when we apply it later.
Extract the Zip file and put its contents into the USB Flash Drive.
Now your USB Drive should contain a folder called "files", if it doesn’t then check to see where you have gone wrong.
Step 2. Installing Leopard
Now that you have the Patched DVD with you, you can now install Leopard. Pop in the DVD into the drive and boot into it by pressing F12 at the BIOS Prompt.
Boot into the DVD and the installer should now load. It take a while though, so be patient.
Select your Language and make sure you select Customize and you need to deselect all the packages that are displayed.
Leopard will now install. This can take a while, so go grab yourself a coffee.
It will ask you to Reboot, so go ahead and Reboot. Before rebooting make sure that USB Flash Drive is connected to the PC.
Step 3. Patching Leopard
Now that you have got Leopard installed, you need to patch it. Before we do that Boot into the Leopard DVD like the way you did before.
Wait for the Darwin Bootloader to load. Once it loads up press F8. You should now see a prompt. Type -s and hit enter. The DVD will now load in Verbose mode. Watch for any errors. It should load without a problem because you have already installed Leopard.
Once the setup is loaded select your Language. Once done you should now be seeing the Welcome Screen. Once there navigate to Utilities-Terminal.
Once the terminal loads up, you now need to browse to your USB Drive, so follow the steps below, typing it exactly as it appears below in the Terminal.
In the command line type the following as they appear here
cd ..
cd ..
cd Volumes
cd Patcher
cd files
Notice the space between cd and the 2 dots.
Now its the time to run the patcher to make sure Leopard will work on your PC. Type the following into the Terminal.
./9a581PostPatch.sh
The Patch should now run. You can answer Yes while removing the ACPUPowerManagement.kext
After the Script is done, you should now be able to Boot into Leopard after you restart.
Step 4. Congratulations! You’ve done the Impossible!
Well that was it. Please note this has not been extensively tested, so most of your Hardware like Sound, Network may not work. If something goes wrong for you or you want to help us, then please join the discussion over at OSX86Scene. If you noticed I haven’t posted the links to the Torrent that contains the DVD image and the zip. Well I haven’t posted them because I am sure the lawyers over at Apple are going to sue the hell out of me. If you wondering where you can find them, then head over to Demonoid and search for it.
Well here are few screenshots by Mac.nub over at the forums who could get Leopard working on his system.
Some Updates and Clarifications :
This Hack works on Intel PC’s with atleast SSE3
You need to format your Leopard Partition to HFS+
Make Sure you install Leopard on MBR and not GUID or it won’t boot.
More Patched DVD’s from Uphuck, Netkas is in the works so it would be better if you wait for the polished releases to come out.
苹果软件下载地址：
[MAC版下载地址1]
下载有问题？ 无法下载？死链接？ |
* 注意：本网站苹果软件版权归作者所有。本软件由网上搜集整理，本站不承担任何技术及版权问题；在本站下载任何软件仅提供学习参考，不得用于商业用途，请在下载后在24小时内删除；本站不保证软件的完整性和是否隐含病毒，请自行调试及杀毒，如不同意本条款请勿使用，谢谢合作！
* 若提示输入用户名和密码可以输入 用户名：web 密码: chinamac
* 注意：同一IP地址只能同时下载一个软件。可以在任一PC、MAC机上下载本网软件。可以使用加速下载软件下载，如PC的Flashget，MAC的SpeedDownload来加速下载速度。
* 对于有些网友反应直接点击下载一些超过500MB的文件下载时，下载一部分经常断掉的情况，可以使用加速下载软件下载，如PC的Flashget，MAC的SpeedDownload来加速下载速度。
* 常见下载后的扩展名是.sit、.sitx、.hqx、.dmg、bin、zip等,其中.sit、.sitx、.hqx、zip可以用Stuffit Expander解压。
* 建议使用MacOSX系统的Safari浏览器浏览下载本网软件。使用Microsoft的Intelnet Explorer下载的部分文件扩展名是以.php为结尾的，正常情况下，下载完成后Stuffit Expander可以自动打开并解压,若没有自动解压,将.php改为.sit，手动打开Stuffit Expander解压。如果还不能解压，则有可能是MacOSX中使用的文件格式.dmg， .dmg文件只能在Mac OS X系统中使用。
* 如果注明是BT软件，我们提供的是BT种子，解压后还需要使用BT下载工具BitTorrent下载。
* 如果您发现该苹果软件不能下载，请通知管理员webmaster@chinamac.com，谢谢
软件使用交流请到论坛讨论 |
|
如果你在运行环境中看到“Universal”的标记，这就说明该应用程序在配置 Intel 和 PowerPC 处理器的 Mac 电脑上都可以运行。用通常的方法安装好，它们就会自动以适合 Mac 架构的最高性能运行。 |
 |
如果看到intel的标记，这就说明该应用程序只能在intel处理器的Mac电脑上运行。 |
 |
如果你在运行环境中看到Mac的标记，这就说明该应用程序只能在PowerPC处理器的Mac电脑上运行。 |
 |
如果你在运行环境中看到Windows的标记，这就说明该应用程序只能在intel处理器的PC电脑的Windows系统中上运行。 |
|
|
